Fabtech 3" UCA Lift Kit Uniball With Dirt Logic 2.5 Coilovers OEM Bilstein Shocks | 4-Door | Bronco 2021+

The Uniball UCA Lift Kit increases front suspension travel, enhancing offroad experiences with the clearance to run 35" tires. Front and rear height will be level, for an aggressive appearance. This system is designed to work with the OEM Bilstein Shocks and are great for additional suspension performance without excessive lift height.

Features and Benefits:
- Eliminates upper ball joint w/ super strong 1" ID Stainless American Uniball
- Chromoly tubing reduces flex found in stock arms for more positive road feel
- Stainless steel heat treated Uniball pin fits into factory ball joint taper without modification
- Great system for the daily driver that requires increased offroad performance
- Adjustable lower rear link arms for increased strength & articulation
- Front and rear dirt logic 2.5 coilover shocks
- For Use with OEM Bilstein Shocks

The factory Bronco upper control arms are replaced with Fabtech’s Uniball Upper Control Arms that provide additional wheel travel with an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires.

The Fabtech upper control arms are constructed of the finest material with .120" wall 1.25" OD 4130 Chromoly steel tubing. High quality 1" FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind.

These super stout Bronco upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel.

The Fabtech upper control arms have been designed to work in conjunction with the Dirt Logic 2.5 Coilover shocks to provide additional front wheel travel.

The rear suspension receives Adjustable Lower Link Arms with Fabtech’s lifetime 5 Ton joints. The lower links are .313 thick wall tubing that are guaranteed never to bend. Dirt Logic 2.5 Coilovers are utilized for a balanced ride front to rear.

Tech Tip:
- Use 35/12.50R17 tires w/ 17×9 wheels w/ 4 1/2″ BS w/ minor trimming
- Use 35/12.50R18 tires w/ 18×9 wheels w/ 4 1/2″ BS w/ minor trimming
- Use 35/12.50R20 tires w/ 20×9 wheels w/ 4 1/2″ BS w/ minor trimming

Please Note: Designed for use with OEM Bilstein shocks.